Plastic pipe ppr pipe welding machine

Specified voltage: 220V 50HZ Rated Power: 800W Work temperature:0-300 degree centigrade Size :Dn20-63

Specified voltage: 220V   50Hz

Rated Power: 800W  

Work temperature:0-300 degree centigrade 

Size :Dn20-63

 

Welding Note:

Cut the pipe. Push the pipe and fitting into the moulds for some time (See the table). Pull them out and insert the depth needed steadily .Please do not screw the pipes and fittings

OD (mm)	Heating Time (s)	Depth (mm)	Cooling time(min)
20	5	14	3
25	7	16	3
32	8	20	4
40	12	21	4
50	18	22.5	5
63	24	24	6

Usage: 1. Fixed install heating-side welding head, the welding device placed on the shelves, according to specifications required to install the corresponding heating pipe die head, and pull tight with a hex generally small in the preceding paragraph, a large back-end. 2. Switch on the power (note the power supply must be protected with a ground line), according to the corresponding models of the machine to the instruction attention to light changes, until the welding temperature control device to enter the work state, can be started. 3. With vertical cutting device to cut off pipe tube, pipe and fittings will also promote the welding device with no moving within the die, as required for operation. Immediately after the heating time to reach pipes and fittings removed from the die head at the same time, rapidly rotating non-uniform insert directly to the desired depth, to form a uniform flange joints

Plastic pipe ppr pipe welding machine